Odie Trophies - Season 6 and 7
- BAZZIL
- Boom Boom !
- Posts: 4097
- Joined: Mon Dec 13, 2004 11:09 pm
- Contact:
Odie Trophies - Season 6 and 7
I have collected all the trophies from Inspectors mantle piece and re-attatched the name plates. I will be sending Vikings down to him and I will deliver the others to everyone else who lives in palmy (I think there must be something about palmy drivers )
But I must say well done to Odie who seems to get little mention but does a great job on the trophies and sending them all the way from Japan over to New Zealand.
Trophies look Brill, I snapped some piccies off while they were all at my place.
Many thanks Odie for the trophies you provide for our league
Season 5 trophies
Season 6 trophies
Season 5 and 6 trophies
go the odie trophies !
But I must say well done to Odie who seems to get little mention but does a great job on the trophies and sending them all the way from Japan over to New Zealand.
Trophies look Brill, I snapped some piccies off while they were all at my place.
Many thanks Odie for the trophies you provide for our league
Season 5 trophies
Season 6 trophies
Season 5 and 6 trophies
go the odie trophies !
Boom Boom !
If ya don't know what to do, Don't ask Snake Wogers, he's got no idea.
If ya don't know what to do, Don't ask Snake Wogers, he's got no idea.
- Happy
- Team DuD Motorsport
- Posts: 1191
- Joined: Tue Oct 19, 2004 11:22 pm
- Location: Palmy
- Contact:
- MadMarty13
- Posts: 1312
- Joined: Sat Mar 12, 2005 8:29 am
- Location: Napier,NewZealand
- Contact:
re
awesome looking Trophies Odie great stuff
2005
NASCAR2003SEASON-VRCONCEPTS LEAGUE #13
INSPIRE NET LEAGUE Monsters inc #113
STOCKCAR HEAT #13 & HawkesBay Hawkeyes Team captain #13
R-Factor-GTR-GTL-GPL
NASCAR2003SEASON-VRCONCEPTS LEAGUE #13
INSPIRE NET LEAGUE Monsters inc #113
STOCKCAR HEAT #13 & HawkesBay Hawkeyes Team captain #13
R-Factor-GTR-GTL-GPL
- Jetboy
- Posts: 1283
- Joined: Tue Jan 18, 2005 5:52 pm
- Location: Palmerston North
- Contact:
- odonohuesp
- Posts: 1005
- Joined: Thu Dec 30, 2004 12:36 pm
- Location: Green Bay, Wisconsin USA
- Contact:
- BAZZIL
- Boom Boom !
- Posts: 4097
- Joined: Mon Dec 13, 2004 11:09 pm
- Contact:
- odonohuesp
- Posts: 1005
- Joined: Thu Dec 30, 2004 12:36 pm
- Location: Green Bay, Wisconsin USA
- Contact:
Thanks guys....you took this Yankee in with open arms and made me feel like a Kiwi with a different accent
I wanted to give something back.....anyway if I get orders for Recruiting Duty, this will be my last season for racing and last season for providing trophies.
On another note...is anyone interested in purchasing a NASCAR Diecast at 1:24 scale
I have 2 for the Dale Earnhardt Foundation.
A picture is attached, I did not take this picture, but it is to give you an idea of what the car looks like
One is RCCA and one is Elite
The Elite has:
Fully detailed die-cast body including:
Opening hood with stamped metal hood hinges
Opening trunk with stamped metal trunk hinges
Opening roof flaps with cables
Realistic mesh screen in lower grill
Rear window funnel access
Tampo-printed graphics and high-quality paint
Realistic hood and deck pins
Detailed front mesh grill
Fully detailed die-cast chassis including:
Die-cast tie rod assembly
Independent coil spring front suspension with sway bar and detailed disc brake assembly
Accurate header contour and simulated exhaust openings
Separate spoiler bracing
Silver wheel rotors rotate through the brake calipers
Red primer on center section of cars rear-end
White drive shaft required by NASCAR® safety rules
AERO wheel design
Realistic Goodyear tires with stickers
Working rear shocks and rear suspension
Manufacturer-specific engine detail including:
Manufacture specific valve covers
Braided hoses
Radiator inlet box
Drive shaft loop
Pliable spark plug wires
Rubber fan belt for air cooler
Enhanced electronic ignition system colored in silver, black and red
Detailed interior including:
Working steering wheel
Interior hoses painted black
Simulated fabric window net
Detailed trunk compartment with authentic red painted fuel cell
Packaging
Packaged in hinged Elite box with standard Elite sleeve
And the other is a Club Car
Outside the Car:
Die-cast body and chassis
Opening hood with stamped metal hood hinges
Realistic hood pins
Tampo-printed graphics and high-quality paint
Inside the Car:
Working steering wheel
Manufacturer-specific engine detail
Detailed interior compartment
Upgraded interior seat with leg bolster and added roll bar detail
Sequential numbering in rear window
Underneath the Car:
Rear spring detail-separate axle and protection ring
Die-cast tie rod assembly
Independent coil spring front suspension with sway bar and detailed disc brake assembly
Accurate header contour and simulated exhaust openings
Separate transmission, axle, and gearbox
Realistic Goodyear sticker decals on tires
Detailed front shocks and rear shock
I wanted to give something back.....anyway if I get orders for Recruiting Duty, this will be my last season for racing and last season for providing trophies.
On another note...is anyone interested in purchasing a NASCAR Diecast at 1:24 scale
I have 2 for the Dale Earnhardt Foundation.
A picture is attached, I did not take this picture, but it is to give you an idea of what the car looks like
One is RCCA and one is Elite
The Elite has:
Fully detailed die-cast body including:
Opening hood with stamped metal hood hinges
Opening trunk with stamped metal trunk hinges
Opening roof flaps with cables
Realistic mesh screen in lower grill
Rear window funnel access
Tampo-printed graphics and high-quality paint
Realistic hood and deck pins
Detailed front mesh grill
Fully detailed die-cast chassis including:
Die-cast tie rod assembly
Independent coil spring front suspension with sway bar and detailed disc brake assembly
Accurate header contour and simulated exhaust openings
Separate spoiler bracing
Silver wheel rotors rotate through the brake calipers
Red primer on center section of cars rear-end
White drive shaft required by NASCAR® safety rules
AERO wheel design
Realistic Goodyear tires with stickers
Working rear shocks and rear suspension
Manufacturer-specific engine detail including:
Manufacture specific valve covers
Braided hoses
Radiator inlet box
Drive shaft loop
Pliable spark plug wires
Rubber fan belt for air cooler
Enhanced electronic ignition system colored in silver, black and red
Detailed interior including:
Working steering wheel
Interior hoses painted black
Simulated fabric window net
Detailed trunk compartment with authentic red painted fuel cell
Packaging
Packaged in hinged Elite box with standard Elite sleeve
And the other is a Club Car
Outside the Car:
Die-cast body and chassis
Opening hood with stamped metal hood hinges
Realistic hood pins
Tampo-printed graphics and high-quality paint
Inside the Car:
Working steering wheel
Manufacturer-specific engine detail
Detailed interior compartment
Upgraded interior seat with leg bolster and added roll bar detail
Sequential numbering in rear window
Underneath the Car:
Rear spring detail-separate axle and protection ring
Die-cast tie rod assembly
Independent coil spring front suspension with sway bar and detailed disc brake assembly
Accurate header contour and simulated exhaust openings
Separate transmission, axle, and gearbox
Realistic Goodyear sticker decals on tires
Detailed front shocks and rear shock
You do not have the required permissions to view the files attached to this post.