NZrFL45: Asia Pacific GT3 Championship - Round 2
- Mike
- Posts: 505
- Joined: Mon May 20, 2013 3:48 pm
NZrFL45: Asia Pacific GT3 Championship - Round 2
Asia Pacific GT3 Championship
30/01/18 - Round 2: Zhuhai International Circuit
Race Night Format:
7:00pm - Server rolls
8.40pm - Open Qualifying 10mins (Unlimited Laps)
8:50pm - Drivers Briefing on Discord (no cars on the track please)
9.00pm - Race 1 Start
9:25pm - Race 2 Start
9:50pm - Race 3 Start
Race Grids
Race 1 - 20 minute - Grid set by qualifying
Race 2 - 20 minute - Grid set by the finishing order of race 1
Race 3 - 20 minute - Grid set by the finishing order of race 2 but with the top 5 reversed
Race Settings
Flag Rules - Black Only
Damage - 60%
Fuel usage - 2X
Tire Usage - 2X
Mech Failures - Normal
Qualifying Time - 10 mins
Race Length - 20 Mins
Type of Start - Standing
Driving Aids
Traction Control - 0
Anti Lock Brakes - 0
Auto Clutch - Yes
Driving View - Open
-
- Posts: 338
- Joined: Sat Nov 04, 2017 2:16 pm
Re: NZrFL45: Asia Pacific GT3 Championship - Round 2
Hi team,
I'll do my best to make qualifying but due to family circumstances I may be a little late. I'll definitely try to make it to Race #1 tonight. (I don't think that not qualifying is going to make a tremendous difference in my grid position )
I'll do my best to make qualifying but due to family circumstances I may be a little late. I'll definitely try to make it to Race #1 tonight. (I don't think that not qualifying is going to make a tremendous difference in my grid position )
- Growler
- Posts: 3700
- Joined: Thu Apr 21, 2005 10:54 pm
- Location: Auckland
Re: NZrFL45: Asia Pacific GT3 Championship - Round 2
Some good racing last night...
-
- Posts: 338
- Joined: Sat Nov 04, 2017 2:16 pm
Re: NZrFL45: Asia Pacific GT3 Championship - Round 2
It was awesome! Despite being royally last - as per usual - it was great fun. I could have possibly be up one or two places each race I think if I had not made some big mistakes that caused me to go off track or cook my tires to a point that I just had to pit. I think fiddling with the diff may actually help as one of my biggest problem was fighting the rear on accelerating out of the corners. (which caused the excessive tire wear and once caused me to plow into the wall, hence the required pit stop.)
- Growler
- Posts: 3700
- Joined: Thu Apr 21, 2005 10:54 pm
- Location: Auckland
Re: NZrFL45: Asia Pacific GT3 Championship - Round 2
There is a section on setting up your car here https://www.kiwisimracing.net.nz/forum/ ... =4&t=18147Erik wrote:It was awesome! Despite being royally last - as per usual - it was great fun. I could have possibly be up one or two places each race I think if I had not made some big mistakes that caused me to go off track or cook my tires to a point that I just had to pit. I think fiddling with the diff may actually help as one of my biggest problem was fighting the rear on accelerating out of the corners. (which caused the excessive tire wear and once caused me to plow into the wall, hence the required pit stop.)
Understanding what your car is doing will help too. Maybe looking at "spinning on corner exit under power" might help. Also feel free to ask questions on the night as there is a lot of information out there.
- Bull
- Posts: 7838
- Joined: Tue Jan 16, 2007 1:12 am
- Location: Christchurch
- Contact:
Re: NZrFL45: Asia Pacific GT3 Championship - Round 2
I am hoping to do a setup guide at some point to help out
-
- Posts: 338
- Joined: Sat Nov 04, 2017 2:16 pm
Re: NZrFL45: Asia Pacific GT3 Championship - Round 2
Thanks Growler, that's a very informative post! *book marked*Growler wrote: There is a section on setting up your car here https://www.kiwisimracing.net.nz/forum/ ... =4&t=18147
Understanding what your car is doing will help too. Maybe looking at "spinning on corner exit under power" might help. Also feel free to ask questions on the night as there is a lot of information out there.