HQ 3Spd Gearboxes
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
HQ 3Spd Gearboxes
hey all can some1 comferm somthing for me i no the prefect shifter fits but aparently sum jappers shifters fit to can some1 tell me wat ones???
Signature Removed
- Chainsaw
- Posts: 472
- Joined: Mon Sep 07, 2009 5:32 pm
Re: HQ 3Spd Gearboxes
Ill try find out what i use to have for you bro!
I have probably rolled a Superstock more times than most Superstock drivers. This is because I race on the absolute limit week in and week out. - Hemi 9/9/11
- Harding Jr
- Posts: 2662
- Joined: Mon Dec 18, 2006 11:26 am
- Location: Gisborne
Re: HQ 3Spd Gearboxes
You can use the Cable shifters like found in a lot of FWD cars. Takes a bit to set up though.
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
Re: HQ 3Spd Gearboxes
rger thanks harding yea my box on its side to witch is a pain in the arch
Signature Removed
- Chainsaw
- Posts: 472
- Joined: Mon Sep 07, 2009 5:32 pm
Re: HQ 3Spd Gearboxes
mine was on the side! didnt find out today sorry ow, was busy
I have probably rolled a Superstock more times than most Superstock drivers. This is because I race on the absolute limit week in and week out. - Hemi 9/9/11
- Harding Jr
- Posts: 2662
- Joined: Mon Dec 18, 2006 11:26 am
- Location: Gisborne
Re: HQ 3Spd Gearboxes
We run Dad's on the side. Have you got the top plate that bolts onto the side of the gearbox with the two pinion's sticking through with tags? Or is it the plate itself you need?
If it's just the plate, your going to need one and I very much doubt anything other than an HQ would fit (I may be proven wrong). But if you have the plate and the tags, then you need the on the side gear lever setup which bolts onto the plate at the back (top) of gearbox.
If it's just the plate, your going to need one and I very much doubt anything other than an HQ would fit (I may be proven wrong). But if you have the plate and the tags, then you need the on the side gear lever setup which bolts onto the plate at the back (top) of gearbox.
- Chainsaw
- Posts: 472
- Joined: Mon Sep 07, 2009 5:32 pm
Re: HQ 3Spd Gearboxes
Found out for ya! We used a carolla shifter. We changed the cables to rods tho...but talking to pooh he says they now rig the cables up to work???
Hope that helps!
Chainsaw
Hope that helps!
Chainsaw
I have probably rolled a Superstock more times than most Superstock drivers. This is because I race on the absolute limit week in and week out. - Hemi 9/9/11
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
- Harding Jr
- Posts: 2662
- Joined: Mon Dec 18, 2006 11:26 am
- Location: Gisborne
Re: HQ 3Spd Gearboxes
That's up the right way? If you can get a prefect shifter that would be ideal. It would just bolt straight on (providing the tags are in the right positions). Otherwise going the way of the cable shifters most Toyota's have similar cable shifters but they just vary in length depending on the make of the car.
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
Re: HQ 3Spd Gearboxes
no harding thats on its side the shifter plates ment to b on the right side not the top ive been looking for a prefect shifters but there is none i even asked the guy to leave the prefect shifter in it but he said no i offered him $400 for it
Signature Removed
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
Re: HQ 3Spd Gearboxes
i might just bolt two shifters on it for now untill i get something sorted
Signature Removed
- Chainsaw
- Posts: 472
- Joined: Mon Sep 07, 2009 5:32 pm
Re: HQ 3Spd Gearboxes
Na bro i had mine like that, just mounted the shifter above it on a plate welded to the hip plate. Then had straight rods to the Side of the box (which is the top harding lol)
Chur
Chainsaw
Chur
Chainsaw
I have probably rolled a Superstock more times than most Superstock drivers. This is because I race on the absolute limit week in and week out. - Hemi 9/9/11
- Chainsaw
- Posts: 472
- Joined: Mon Sep 07, 2009 5:32 pm
Re: HQ 3Spd Gearboxes
Ah yours is center mounted. that is the ones that pooh said they now run cables on. ill try get a photo for you at pracy this sat!
I have probably rolled a Superstock more times than most Superstock drivers. This is because I race on the absolute limit week in and week out. - Hemi 9/9/11
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
Re: HQ 3Spd Gearboxes
im confused lol
anyways at this stage i have found a pool of water under the car thismorning grrrrr gota work out where its coming from
anyways at this stage i have found a pool of water under the car thismorning grrrrr gota work out where its coming from
Last edited by Ex0dusNZ on Thu Oct 07, 2010 9:51 pm, edited 1 time in total.
Signature Removed
- Naki
- Posts: 2828
- Joined: Wed Oct 26, 2005 5:09 pm
Re: HQ 3Spd Gearboxes
Should pm each other lol
- Chainsaw
- Posts: 472
- Joined: Mon Sep 07, 2009 5:32 pm
Re: HQ 3Spd Gearboxes
Should just not bother reading this if it doesnt interest you ow! I mean your car has a center mounted engine eh? Mine was offset so was close to the sidewall!
Hopefully all will show its self on sat!
Hopefully all will show its self on sat!
I have probably rolled a Superstock more times than most Superstock drivers. This is because I race on the absolute limit week in and week out. - Hemi 9/9/11
- Daniel17p
- Posts: 463
- Joined: Wed Dec 03, 2008 7:57 pm
Re: HQ 3Spd Gearboxes
need some engin drgresser mate
REES RACE CARS
2011 KSS Indi League - ReesRaceTank 171 P.N
2011 KSS Indi League - ReesRaceTank 171 P.N
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
-
- Posts: 113
- Joined: Wed Dec 10, 2008 8:22 pm
Re: HQ 3Spd Gearboxes
I am pretty sure there was a thread on macgors in the tech section about alternative shifters;i had a quick search for it but couldn't find it. on page 11
in new stockcar 29s thread there is some info on a sparco shifter.
in new stockcar 29s thread there is some info on a sparco shifter.
3rd New Zealand superstock champs 2010
1st North Island Superstock champs 2010
1st Auckland Superstock champs 2010
2nd Sint maartan Superstock stomp2010
3rd xmas Superstock bash 2009
1st North Island Superstock champs 2010
1st Auckland Superstock champs 2010
2nd Sint maartan Superstock stomp2010
3rd xmas Superstock bash 2009
- Harding Jr
- Posts: 2662
- Joined: Mon Dec 18, 2006 11:26 am
- Location: Gisborne
Re: HQ 3Spd Gearboxes
Just wait until you go off the end into the concrete wall with one and a half tonne of steel pushing you at 100clicks and see how much of a headache you get then . Then the headache of getting the car fixed and ready for the next race .EAO_Sonic wrote:sterring packed itself now omg wat a headach
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
Re: HQ 3Spd Gearboxes
hahaha yea cant wait for that lol i jst wanna get on track but everytime i fix something i find something else wrong:P
Signature Removed
- Harding Jr
- Posts: 2662
- Joined: Mon Dec 18, 2006 11:26 am
- Location: Gisborne
Re: HQ 3Spd Gearboxes
Yeah man the joys of speedway. Spend hundreds of hours preparing a car and getting it ready just to spend a few minutes on the track a night .EAO_Sonic wrote:hahaha yea cant wait for that lol i jst wanna get on track but everytime i fix something i find something else wrong:P
- Ex0dusNZ
- Posts: 292
- Joined: Sun Aug 23, 2009 9:22 pm
Re: HQ 3Spd Gearboxes
wonder if they will let me run without a gearstick lol im happy how it is for now :P
Signature Removed
- Harding Jr
- Posts: 2662
- Joined: Mon Dec 18, 2006 11:26 am
- Location: Gisborne
Re: HQ 3Spd Gearboxes
I don't see any rule that says you have to run with a gearstick, or a gearbox for that matter. It just says the gearbox must be OEM .